THIS IS THE ESSENTIAL AFTERMARKET PART!!!
Each Rad Guard comes with its own easy to read fitting instructions. The Rad Guard is bolted onto existing mounting points. There is NO cutting or alterations needed to fit this Rad Guard.
Aircraft grade 6060 T1 –T5 aluminium is used to manufacture our Expanded Mesh & Frames.
The rigid frame of the Rad Guard holds the expanded mesh in place so that hard hits by stones and any other road debris will save your core from certain damage. This rigid frame also acts as a brace to prevent the radiator core from being squashed if a side impact occurs. For example, the bike falls off the stand.
The Expanded Mesh has proven to be the perfect choice of material. It is lightweight and very strong. It does NOT restrict air flow.
The Expanded Mesh sits off your radiator core by approximately 10-15mm, so even a direct hit from a stone, bird or any other road debris will save your radiator core from being damaged.
All Rad Guards come with rubber backing were necessary to alleviate any rubbing or vibration. This has already been installed on the guard.
All Rad Guards come with a 3 Year Transferable Warranty.
Protect your radiator and order your Rad Guard today.
Shipping cost. Click here.
Other Details3 Year Warranty
8 Reviews Hide Reviews Show Reviews
Excellent product. This is my second rad guard and both have been an excellent fit and finish. Instructions were on the mark with both bikes.
top shelf, guard arrived on time and fits like a glove, well done Rad Guard awesome !
Great product. Easy to fit. Performs well.
Speedy delivery, no problems.
when I received my package and opened the box I knew the was a well built product,I took the radguard out and looked it over then read the directions and then went to work installing it.heres what I did I removed the bottom bolt of the radiator then I turned the wheel and put the radguard inside the fairing just be carefull when sliding in to place not to damage the radiator,it also helps if you can have some hold the bottom of the radgaurd when you go to put it over the radiator.when you you go to put the hooks over the radiator the instructions tell you to lift the plastic up 10mm to side the hook over the radiator but this can be alittle hard because the plastic hits the top radiator bolt head.so what I did is to take out the 2 radiator bolt and then lift the plastic up and slide the hooks over the radiator this will save you some time and frustion.i agree that the lower mounting bracket hole was to high and needs to be lowered abount 1/8 of inch,other than that im very pleased with the guard looks great and fit well.if I ever need another radiator guard I will be back .thanks for a great product im spreading the word.
The Radguard was promptly delivered arriving only a couple of days after placing the order. The item was well packaged and the included instructions were easy to follow. The item itself is well finished, the standard of welding is good and it looks like a professional piece of kit.
Installation of the item was not as straightforward as anticipated and I found it quite difficult to fit to the bike. Maneuvering the top hooks between the top of the radiator and the plastic cover was quite fiddly but once in place the Radguard conformed to the front of the radiator brilliantly.
As alluded to in the instructions, I had to alter the Radguard's bottom mounting bracket in order for it to line up with the radiator bottom bracket. I found it easier to slightly ream out the Radguard bottom bracket hole which allowed me to install the mounting bolt rather than bending the mounting bracket.
Apart from being a bit tricky to fit in my case, overall I am very pleased with the product and it looks great on the bike. I have only traveled about 50 kms so far with the Radguard installed but so far so good. I have no doubt it will work as advertised over the long term.
The rad guard for the Kawasaki GTR1400 is an extremely well designed and made product which was easy to fit offering the perfect protection for the radiator.Looks good,fits great.
Thanks for a great product and excellent no hassle service.
The fitting instructions were good and it fits really well without any alterations.
My RadGuard looks a treat on my Kawasaki GTR 1400 and I have no hesitation in recommending your product.
Thanks again for a great product for my 2013 Kawi Coni. Took very little effort to install and I'm sure it will keep the "Canadian Gravel" from the rad.
To those of you up north here in Canada; it took exactly one week to receive from the time that I ordered it. Shipping cost was minimal. Just like the 1st I purchased back in 08.
Well done RadGuard.
Thanks for keeping my rad safe.
Grande Prairie, AB, Canada.